Senior Member
DXF file
OK, I got the DXF imported successfully, and I got the errant lines straightened out. When I went to create a tools path the software wouldn't come up with the tool path menus.
Nothing........What did I do wrong? Is there a problem with geometry? Did I not get a complete path? When moving the errant lines around did I not get them connected? What could be wrong?
Thanks again, in advance, for your help in this.
Senior Member
Tom...
I couldn't make the toolpath menu not come up regardless of what I did to replicate your situation... Can you tell us more how it's happening? Have you tried rebooting?
SG
Senior Member
Did you have your vectors selected? I guarantee it is something simple.
You should get some type of error message if you are doing something wrong. Can you capture a desktop screen of whats happening?
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Senior Member
Sorry guys for not getting back sooner. Not sure what was going on, I actually closed the program and reopened it with the same result. I did not reboot the computer. I left it alone and the next day, I asked one of my students if he "had ever encountered this...." bringing up the file and clicking on the tool paths menu tab....guess what? everything opened fine, worked fine, made me look like ID10T.
As it is, we have the file ready to run tomorrow.
Thanks guys for the responses.
Posting Permissions
Reply With Quote
