Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Library Project

  1. #11
    Join Date
    Dec 2000
    Location
    Thorp, WI
    Posts
    2,845

    Default

    Beautiful work! I like mission style (and morris style chairs) and have done a fair amount myself but haven't made much of it for our own use. When my wife looks at it, she sees 'dust catcher' so I make it for others when I can.
    Scott




  2. #12
    Join Date
    Mar 2004
    Location
    Delray Beach, FL
    Posts
    3,708

    Default

    I've been a Stickley and Greene and Greene lover for most of my adult life and really like the work you have been doing for the library over the years. I do have a couple questions about your mortise and tenon rigs.
    I notice you are using a smaller bit for the mortises. I'm assuming you make the mortises 3/8 wide and wonder why you don't use the same 3/8 bit as you use for the tenons and just cut on vector? Are you setting both mortises and tenons for the same size and a tight fit or creating a small allowance?
    Enjoyed the video and your rig. Do the posts getting tenons have more holding them in place then the one side and bottom fence stop and the ram?

    Really like your carving work as well (as you know!!).

  3. #13
    Join Date
    May 2011
    Location
    ny
    Posts
    834

    Default

    Dave I use a 1/4 bit mostly for mortises, and 7/16 cutter for tenons on 4/4 and 6/4.

    The reason for this is I sharpen my own tooling so I have several files to account for fit as diameter changes. Hope that makes sense.

Similar Threads

  1. Tool Library for ShopBot Bits
    By Riptide369 in forum Autodesk Fusion 360
    Replies: 8
    Last Post: 12-20-2017, 05:01 PM
  2. Library sign
    By dvmike in forum Sign Making
    Replies: 6
    Last Post: 08-25-2016, 09:14 PM
  3. Library chairs
    By Brian Harnett in forum Folder 2013
    Replies: 1
    Last Post: 07-18-2013, 08:24 PM
  4. 3D library
    By bcondon in forum Archives2008
    Replies: 1
    Last Post: 12-01-2008, 12:23 AM
  5. Toolpath Manager Library Message
    By wayne_walker in forum Archives2007
    Replies: 6
    Last Post: 09-17-2007, 10:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •