is there any way to change the position of my lead in and out it seems like it picks a place at random. thanks Tad Sinclair
is there any way to change the position of my lead in and out it seems like it picks a place at random. thanks Tad Sinclair
Select your vector.
Press N to go into node edit mode.
Hover the mouse over the part of the vector where you want the leads to be. The mouse cursor will change when it's over the vector
Press P (a green square should appear).
Recalculate the toolpath and the leads will be where you placed them.
The answers to a lot of questions can be found at http://www.shopbottools.com/ShopBotDocs/ or http://support.vectric.com/