Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 10.5
2.2Hp universal 4 zone Vac Table
I may have an alternative for your issue we have a product CR 18 38 http://allstaradhesives.com/cart/pro...il/cr_18_38/50 this is .1875 X .375 wide maybe this may work better for you?
Here is a sneak peek at our base and grid on our vacuum table
Here are some more images
George, I also am interested in a 48"x48" that I can take on and off my 48"x96" table.
Thanks,
Dick
Dick
Aspire 10.5
Dick
I need to ask why would you do only half of the table and what is the purpose of removing the 48 X 48 from the table?
You already have that available. It's called a BradyVac & it's free...aside from whatever material or scrap you use.
RE: BradyVac I & BradyVac II
-B
High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com
that is true Brady...I certainly interested in the AllStar System - they helped me design a job specific vacuum table for a coaster project I was working on a few years ago...When I get to spend every day in the shop and not in my day JOB, I'll obviously have more time to fabricate jigs and fixtures...I'll review the BradyVacs again...
Thanks
Dick
Dick
Aspire 10.5
Here is what the manufacture had sent to me
• Includes foot plate on vacuum pump, 6 ft. power cord 14 gauge and wired for 110VAC-60hz-single phase, silencer, street tee, vacuum gauge female hex, long nipple, inline plastic vacuum filter with clear plastic bowl, hose barb x ½”, tested for operation prior to shipment
• Assembled in two sections – pump with fittings (gauge) and vacuum filter and fittings and are packaged in one box for shipment.
• It is recommended your customer provide a dedicated 15amp circuit with switched outlet