This is a project my wife and I have been working on for the past couple of months. This is from the MakeCNC file by the same name. The size is about 55" wide by 37" tall by 24" deep. The piece across the back was the largest by the above dimensions. All this was cut on a BT 32 with a 24 by 32 inch table. Quite an exercise in using the "Tiling" feature in Aspire! I did the cutting and my wife did all the decorating and painting. She also made all the interior floor coverings and wall papers and curtains, etc. The kitchen appliances you see were made by her from wood scraps we had in the shop. Now, will try to include pictures and see how that goes....joe