Scott:
Those look good enough to eat.
Trouble is I can't make up my mind between the dark chocolate, milk chocolate, or butter cream!
Scott:
Those look good enough to eat.
Trouble is I can't make up my mind between the dark chocolate, milk chocolate, or butter cream!
from our photographer/salesperson
"they look like yummy cookies!! LOL"
Rethinking to calling them "Beaver treats" or "Ultimate fibre treats"
"Wookies" might be great for Vegans.
Means a lot from you Dave!
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Hey Scott,
I know that the 1.25" one won't, but not sure about a smaller diameter one. I have a 0.75" one, but don't use it much and can't remember how much it doesn't cut in the center. Not near the shop to look at it at the moment. They do leave a good size nib uncut in the center and can't be plunged much more than 0.1".
Scott
Thanks Scott.
Guess I'll finally buy some and find out
Both the 3/4 and a larger shank and diameter for display trays.
Thanks
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Not much difference between Keyfobs and Buttons
First order that was made sight unseen by buyer who had only seen Button quality is going out today to Camden,Maine
Once a Tree
http://www.onceatree.net/products/
Thanks Bleeth for American made hardware recommendation of BallChain...we used their SS heavier duty 4"!
Oh, Stand was made by Ron the new second Desktop operator...without a Desktop and conventional tools in 12 hours after seeing the finished fobs.
GOOD initiative on his part!!
Last edited by scottp55; 04-26-2016 at 03:54 PM.
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Quite nice Scott.. if you want to bump the class up a little on the chain set up for less money let me know. I use a brass v clip and a brass key ring. total cost on my set up about 30 cents. Will set you up with the company I buy wholesale from.
www.tgdesigns.net
eking1953@yahoo.com
HE WHO WORKS WITH HIS HANDS IS A LABORER.
HE WHO WORKS WITH HIS HANDS AND HEAD IS A CRAFTSMAN.
HE WHO WORKS WITH HIS HANDS, HIS HEAD AND HIS HEART IS AN ARTIST.
ST. FRANCIS OF ASSISI
Thanks Eugene,
Can you e-mail me the info if it's American made?
Went stainless as it's a Yachting town, and Carabiner as my Mom at 84 has problems adding a key to split ring style(Dad is worse at 87) and I was rock climber so love 'biners.
Brass would work well if I could see it and it wasn't plated.
Say hi to Tina, and sorry about your Uncle
Take care,
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
First totally custom order out the door today.... 18 days before deadline.
4 coats of Linseed/Beeswax and sanded to 600G prior.
Onsrud 30engraving with .005" flat for fonts.
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Oh, .5"BN for scalloped edge and countersunk button holes.
Slowest part was the reduced Plunge speed on the font to prevent tearout in Cherry.
NOT my first choice wood choice for tiny font, or an oil finish because of bleeding in the beginning of summer temps.
Color is still coming into wood, and reverse side is 2-3 shades lighter.
The lighter buttons just need a little more sun, but will never be as dark as the full heartwood blank I used for 18 of them.
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Nice looking buttons. good job on the custom order.