Anyone straightened a warped Z plate-Perfectly?
Turns out the Z-plate on the second Desktop has a slight bow in the middle (I didn't catch that). Now that I'm 375 miles south, I told Kirk to get a perfectly flat piece of maple and cautiously tap it back flat, then thought to stick in wood vise and CRANK it, then thought same vise with a shim the same as the Gap and cranking it, THEN,---THEN thought we're probably not the only people that have had to deal with it. Anybody been PERFECTLY happy with the way they did it? I know,I know----Super-Zero. But fixing it today would be great.
MINE is FLAT, so I don't want to experiment. Thanks, scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine