You need to google pictures of the "Legacy Ornamental Mill" and go to youtube to watch some of the videos of the manual mill not the cnc. What you will find is the mill is basically made up of 8020 aluminum and their setup for a moveable tailstock looks fairly easy to emulate. I had a legacy 900 but sold it. If you are that interested in making something you might go to:
https://groups.google.com/forum/#!fo...namental-mills
and ask if anyone has parts they would like to sell. I think if you could get someone to make some pictures for you, you could make one for yourself fairly cheap!
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson