Be sure to make a welder attachment so when it gets done machining the tank it can weld the area that needs repaired
Be sure to make a welder attachment so when it gets done machining the tank it can weld the area that needs repaired
Khalid,
A very few miles from me are several geothermal wells - wonder if they'd be interested in something like this? (Power companies here have lots of $$)
Ron Sloan
20 cm is a super deep cut in steel. Show pictures when done.
"Once a person moves away from the computer and CNC some of the most important work begins." ~Joe Crumley
10cm only and not 20cm deep...
All calibrations done.. Now we are going to test the machine Lets cross the fingers..
I left woodwork due to office work.
As always, very impressive stuff Khalid! I have learned a lot from you over the years. Thank you!
I'm going to be revisiting the embroidery concept very soon...
Mike
Thanks Michael,
I forget the embroidery stuff... Sometime when i have time i shall do all embroidery stuff with Arduino itself...
Here are few picture of 2" x 2" x 20mm deep slot we did with this machine. We have mounted hydraulic spindle 300RPM maximum used 4 flute 19mm end mill. Job took 35Minutes...
The spindle had play in the bearing which caused some marks on the work piece walls but those are nothing ...However we are satisfied with the result.. We shall do mockup testing and evaluate the timings...
Video of the job to come..
I left woodwork due to office work.
Here is a brief video
https://www.youtube.com/watch?v=RHkk...ature=youtu.be
I left woodwork due to office work.
khalid...which one are you in the video?? I like your "McGyver" spirit...
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson