made some M1911 grips for my pistol.
wood is Cocobolo.
took about 2.5 hours in all to run both grips
made some M1911 grips for my pistol.
wood is Cocobolo.
took about 2.5 hours in all to run both grips
They look great! Would you be willing to share the files?
Thanks
Jim
96 x 60 PRSalpha, 5HP Colombo spindle, Custom indexer, Custom vacuum table, Custom Fire Extinguishing System
Very nice Adam
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Adam, 60 degree for checkering? Came out beautiful. Finish?
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Scott,
We will have more to talk about when I finally get over there! These are beautiful!
Dick
Dick
Aspire 10.5
I'll try and get a project file for it and post it ,
and as for the finish I used Tru-Oil gun stock finish on the grips.
they have 3 coats of the tru-oil on them gives it a shine and protection only down side is that you have to wait around 12 hours between coats to make it come out right.