Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Golf ball table

  1. #1
    Join Date
    May 2011
    Location
    ny
    Posts
    782

    Default Golf ball table

    I have been doing a trophy room for a retired pro golfer just designed this table for her, its a go, the job is just about done I have not taken many pictures of the progress but it was a lot of display cases and cabinets this table and an entertainment center will wrap it up.

    Just a cad image and a routed piece of plywood for now to see the ball pattern, it really jumps out at you in person.







  2. #2
    Join Date
    Mar 2006
    Posts
    7,830

    Default

    The tabletop has kind of an optical illusion about it...cool.
    Words of Wisdom:
    “Words that sink into your ears are whispered…… not yelled”
    “The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
    “The only difference between a rut and a grave is the depth”
    -----------
    Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
    -----------
    The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson

  3. #3
    Join Date
    May 2011
    Location
    ny
    Posts
    782

    Default

    The picture does not come close to the 3d effect, in person the cutout from 5 feet away looks like its bulging up, its pretty cool thinking about making some barstools next.

  4. #4
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,135

    Default

    Combination of that table, with several glasses of liquid showing true plumb would make you blink a couple of times As an ex-Alky not sure I would sit on a barstool that I couldn't even focus on
    Nice job Brian!
    Scott Plaisted
    2013 Desktop/spindle/VCP 9
    Maine

  5. #5
    Join Date
    Mar 2004
    Location
    Lenox High School, Lenox MA
    Posts
    836

    Default

    Very cool, however it would give my wife an instant migrane.

    Phil

  6. #6
    Join Date
    Mar 2004
    Location
    Delray Beach, FL
    Posts
    3,708

    Default

    Pretty cool Brian. I dig optical illusions and have thought of doing some op-art plaques for the heck of it.
    The outside row of partial dimples irregularly spaced makes it look out of round though.

  7. #7
    Join Date
    Jun 2014
    Location
    Houghton Lake MI
    Posts
    163

    Default

    Very cool Brian it really has a attention getting effect. Something you have to look twice at . Jeff
    Jeff King
    shopbot buddy BT-32
    P/C - 3.25 hp

    The things I make may be for others ,
    but how I make them is for me . T. Konovaloff

  8. #8
    Join Date
    May 2011
    Location
    ny
    Posts
    782

    Default

    Yea Dave I was thinking that too I will eliminate some of the outers, working on it and another project, I got a bit of a handicap a month and a half ago sliced the 3 tendons that close my index finger on glass. so been working one handed with a fabricated arm brace on my left arm to maneuver stuff. Will not have use for another month.

    So my speed is not up where it should be. at least I am right handed

  9. #9
    Join Date
    Mar 2004
    Location
    Delray Beach, FL
    Posts
    3,708

    Default

    CR-P. Sorry to hear it Brian.

    Be well quick.

  10. #10
    Join Date
    Jun 2014
    Location
    Houghton Lake MI
    Posts
    163

    Default

    Brian when you designed the table top did you bit trace a design or do it by by hand one at a time. nice anyway you its done. thanks Jeff
    Jeff King
    shopbot buddy BT-32
    P/C - 3.25 hp

    The things I make may be for others ,
    but how I make them is for me . T. Konovaloff

Similar Threads

  1. Golf Putter Rack
    By terryb in forum ShopBotter Message Board
    Replies: 0
    Last Post: 06-14-2013, 07:08 PM
  2. Get the ball rolling
    By FJ Baker in forum ShopBotter Message Board
    Replies: 5
    Last Post: 07-26-2011, 05:28 PM
  3. Colorcore Golf Signs
    By reiser25 in forum Sign Making
    Replies: 5
    Last Post: 05-15-2009, 08:36 AM
  4. Having A Ball!!
    By foampro in forum Folder 2009
    Replies: 14
    Last Post: 05-06-2009, 01:18 AM
  5. Looking for DXF files (Train & Golf)
    By brian_uline in forum Archives2006
    Replies: 1
    Last Post: 12-08-2006, 11:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •