Centurion Tools CNC bits...

[Gary Campbell]

Lonnie..
We bought some from ENCO..#890-9961 $45
Worked for us
Gary

[centurion]

Just for Christmas all sets on Centurion Tools web site have been reduced 10% If you buy a second set, we will increase the discount to 15% per set.

[rcnewcomb]

Well, after reading about these bits I figured that I'd give them a try.

I put a 1/4" downspiral in a new collet and tried pocketing with it on some sanded pine plywood - a material not known for giving good edge finishes.

I was astonished at how clean the cut was. I am sold. These are outstanding bits.