Thanks in advance!
I'm doing someone a favor ..(no good deed goes unpunished).
They gave me a vector which will be a sign. The vector includes the name of the camp, and a few fish, and a border that looks like a rope design.
They would like this to be engraved (raised) about 1/4" from the remaining sign base.
Ok here are the Q.'s
1) Should I used a V-Carve Tool path (after I do a pocket tool path)
or.. a Prism Tool path (after a pocket tool path)
2) Should I use a V-Bit or a Bullnose bit for the engraving?
FYI the sign will be about 6" tall and 24" long --
3) what material would you recommend - the whole thing has to be painted white -- then the 'raised' logo painted a light blue
Exterior Use
THANKS!!