Quote Originally Posted by jerry_stanek View Post
why not do in vcarve pro with a two rail sweep.
You can't do a 2-rail sweep in VCP. Aspire only in the Vectric family.

It is possible to create a 3D model in another software package that has the radius you need. Then generate the toolpaths in Cut3D. You then save the Cut3D file. You can then import it into VCP and register it to the rest of your 2D project.

You can do it using the SB3, using the Extruder utility - but it will not be as efficient as a CAM-generated file.

-B