1.25 mahogany, 20 x 28 carving, quite pleased with it.
1.25 mahogany, 20 x 28 carving, quite pleased with it.
beautiful Dan but an awful lot of hours carving Hope you didn't pull a marathon sleeplessness to keep an eye on it
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Looks great Dan! How do you run long projects like this? Pause it when you get tired or stay with it the whole time?
Mike
well done!!
Vector Studio 22
Beautiful Dan!!
Don't know how you guys hack those cut times though!
Great work.
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
One of the nicest carvings I have seen on this, or any other forum...joe
Dan,
Very nice . Absolutely gorgeous. Did you oil it?
Yes, 2 coats of oil...I have paused the machine but I didn't on this one, I have some safety precautions the dust collection equipment is outside and in a 1000 gal. tank and wireless fire/smoke detector plus sprinkler heads directly above the machine, also using a .0625 tipped bit, this isn't the longest run time Ive done. I sure like your responses though..lol
From it I received 2 orders same file only larger and one with a sailing ship in it. nice Christmas order.. thanks guys...
32Hour is too much time.... What Feed and tool bit diameter you used?...
I left woodwork due to office work.