I recently had a power outage to the breaker panel that feeds my shopbot. After having an electrician look over the panel I have powered on today to find that the 3-button pendant is not working properly. The number for input #4 is RED. When i release the E-stop and press the reset button input #4 becomes highlighted, but the number itself stays RED. Output #4 then turns off. When i attempt to utilize any kind of motion i get a warning that tells me to "reset the stop button." Also, after i press reset i get a warning graphic in the control window that say "STOP ON" in red and yellow.

I have checked the box, everything is connected properly as well as nothing seems to be damaged from the power outage. Does anyone have an understanding or experience with this issue?