Any idea of the speed and feed rates for cutting RenShape?
http://www.freemansupply.com/RenShape440Styling.htm
I'm gonna be milling using 1/4" and 1/8" bits.
cheers.
Phil
Any idea of the speed and feed rates for cutting RenShape?
http://www.freemansupply.com/RenShape440Styling.htm
I'm gonna be milling using 1/4" and 1/8" bits.
cheers.
Phil
Phil,
On the link you posted click on the "view the machining specifications" under "Additional Information" in the middle of the page.
Bill
Perfect.. thanks,
Phil