If you have installed VCarvePro ShopBot Edition V8, you can get the patch to take V8 to V8.014
Do ‘Help – Check For Updates’ on a computer connected to the internet they should be told there is a new version available and it will be downloaded and installed.
If using a computer not attached to the internet, download the patch from …
http://www.vectric.eu/patches/VCarve...h_to_v8014.exe
You can use a USB stick to transfer to the computer where V8 is installed. Copy this into the ‘Program Files\VCarve Pro – ShopBot Edition’ folder and run it.