The past two days I had a set of bar stools to make from oak. They are fairly large, and heavy duty and will sit on a 36" base.

The seats of course were cut and carved on the Shopbot, with the mortises done as well for the 8mm loose tenons (Festool Dominos).

I cut the 6 pcs of 1.25" thick red oak on the bot as well, and the mortices on them.

I was also trying out my new Lamello LK5 pressurized glue pot, with various tips. I used am 8mm dowel tip to apply glue to the 8mm mortices. Works excellent - if you are not familiar with the Lamello LK system of tips & tanks etc it is a really slick set up for gluing.

Heres some pics..