Let me make sure I understand this Brady. I make two rails, and in my case they are 2 inches apart to indicate a fret board blank for a banjo.
I click on one, and then the other and then the first radius cross section, then click on the 2nd cross section and then hit the two rail sweep button.
I noticed you have sweep between spans clicked so should I also? And let me say I appreciate your help so so much.
Its hard for me to wrap my head around for some reason.
I don't know if I am assigning the cross sections the proper way or not AND, I notice on your cross sections you have lines coming straight down to be the sides of the fingerboard and I don't have that.