Can anyone tell me where to find bamboo plywood? I know this sounds simple, but there is a hug variety of garbage out there and I cannot nail down a reliable source with decent pricing. Looking for full sheets in smallish quantities. Thanks guys.
Can anyone tell me where to find bamboo plywood? I know this sounds simple, but there is a hug variety of garbage out there and I cannot nail down a reliable source with decent pricing. Looking for full sheets in smallish quantities. Thanks guys.
PRS Alpha 96" X 48" w/ 12" Z
4hp Spindle
6" Indexer
Aspire 8
Judging by G's "Watch Winder" project;
http://www.talkshopbot.com/forum/sho...ch-Display-Box
this is the upper end of the spectrum;
http://www.plyboo.com/products/category/plywood-veneer
No personal experience though, but I bookmarked it.
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
This is where we get ours:
http://www.dixieply.com/
Dixie ply does not have a branch in San Diego!
They sell a brand called Plyboo:
http://www.plyboo.com/representative...epresentatives
It's nice quality. Not cheap as I recall but not horrible when compared to other "exotics"
Thanks guys. I found a few sources out here and it basically runs $200 for a 3/4" sheet. Plyboo sold at Cali bamboo was the most expensive distributor for the fong plywood with prices ranges from $250-275/sheet. Pretty sure everyone gets this ply from the same manufacturer and adds on their markup.
PRS Alpha 96" X 48" w/ 12" Z
4hp Spindle
6" Indexer
Aspire 8