Results 1 to 3 of 3

Thread: USB Hub, found a good one

  1. #1
    Join Date
    Mar 2006
    Location
    Habitat For Bats, Jackson GA
    Posts
    2,113

    Default USB Hub, found a good one

    Directly connected to my PC my bot diags showed about 68% efficiency. I used an unpowered USB hub for several years that bumped it up to 73%. It died, I resorted to a USB hub shaped like the Tardis (because I had one on hand) and it to gave me about 73%. I didn't think anything of it but after the Tardis kept falling over I finally found a hub and ordered it.

    I was expecting the same and ran the test... it came in at 85% !!!
    Thinking that must be an error, I switched back to the Tardis, 73, 74, 72% was common with 1000 packets. With 5000 it returned a 68 or 69%

    Back with the new hub, 85% with 1000 packets. With 5000 packets I still got 83%.

    Here is what I bought:
    Anker USB 3.0 4-Port Portable Aluminum Hub with 2-Foot USB 3.0 Cable

    http://www.amazon.com/gp/product/B00...ilpage_o03_s00

    /RB

  2. #2
    Join Date
    Oct 2005
    Location
    Olympia, Washington
    Posts
    257

    Default

    I was just wondering in looking at the USB hub I see it's a USB 3.0, are you plugged into a USB 3.0 port on your computer?
    Ron Moorehead
    R&S Design
    ShopBot PRS Aphla 48 by 96
    Laserpro Explorer 30 watt
    Universal Laser 50 watt
    3D printer

  3. #3
    Join Date
    Mar 2006
    Location
    Habitat For Bats, Jackson GA
    Posts
    2,113

    Default

    Quote Originally Posted by ron_moorehead View Post
    I was just wondering in looking at the USB hub I see it's a USB 3.0, are you plugged into a USB 3.0 port on your computer?
    Yes, it is plugged into a USB 3.0 port on the PC.

Similar Threads

  1. A Good Place To Buy Good Drawer Slides?
    By shilala in forum ShopBotter Message Board
    Replies: 4
    Last Post: 02-10-2013, 07:06 AM
  2. Found this on the Wood Web
    By steve_fedor in forum ShopBotter Message Board
    Replies: 1
    Last Post: 01-22-2010, 05:28 PM
  3. File not found !!!
    By hunterland in forum ShopBotter Message Board
    Replies: 1
    Last Post: 05-22-2009, 09:36 PM
  4. Found something that may fix those jpgs.
    By knight_toolworks in forum VCarvePro and PhotoVCarve
    Replies: 2
    Last Post: 03-24-2008, 01:20 AM
  5. Found a good surge protector for 3 phase
    By elcruisr in forum Archives2007
    Replies: 1
    Last Post: 07-03-2007, 11:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •