Only a little over 4 hours because it was smaller.
Only a little over 4 hours because it was smaller.
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Of course the Moose WILL be a button soon.....just like the Loon scene
Same exact bit and strategy....only the feeds were changed to protect the innocent.
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Apprentice liked "Lady" so much I made her one for Christmas.
Used Drillman1's $4 Kyocera.125" 45 degree this time instead of the 30 degree used on mine on the right.
Cut an hour off the cut time to an even 4 hours
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Had family over day after Christmas. 4 adults and niece and nephew(12 and 8) and they wanted a start to finish new project to watch so each person could see what they were interested in.
Kids got a kick out of choosing their shape and both wanted Freestyle Script as their font.
Entire pocket was done with a MillMonster .125" 3F countersink bit with about a .03"flat at 10% stepover.
Cutout with a Whiteside Pointcutting Round Over .5"D .25R.
Everybody got a kick out of how fast VCP8 was to mod, and then watching the Desktop cut
Good time was had by all for almost an hour.
Oh, Kids decided to make them keyrings--so 5 minutes with drill press made it so.
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Those are pretty slick Scott! Padauk?
Scott
Thanks Scott.
Nope, Just Black Walnut.
I can see why you thinks so from the flash pic on right though
A Lady wants some keyrings made for $6-8 wholesale, so that was in the back of my mind when I made these.
She wants silver dollar/half Business card size though.
Putzing with original Triskellions
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine