Results 1 to 3 of 3

Thread: Wanting to change drivers

  1. #1
    Join Date
    Mar 2018
    Posts
    4

    Default Wanting to change drivers

    I have an old 2005 desktop running SB3 and having problems with my x driver. I've changed the motors and cables and determined it has to be the driver. The motor hooked up to the x driver sounds like its not get enough power to turn the spindle so it just chatters. I would like to use the A driver but when I go into the software to reassign the driver nothing happens. I know the A driver is good because when I hook a motor to it and use the return home command is works. I just had the board rebuilt and it worked for about 30 minutes. Any thoughts on why I can't reassign the drivers?

  2. #2
    Join Date
    Dec 2007
    Posts
    2,295

    Default

    Call shopbot and they will walk you through it

  3. #3
    Join Date
    Mar 2018
    Posts
    4

    Default

    Thanks Jerry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •