Has anyone figured out how to make a 3 axis Z zero plate? (I would love a pre-made one but at $250 USD it would cost me about $430 Canadian with exchange, fees, taxes.)
Thanks
Has anyone figured out how to make a 3 axis Z zero plate? (I would love a pre-made one but at $250 USD it would cost me about $430 Canadian with exchange, fees, taxes.)
Thanks
Many of us have done this using a copper pipe cap imbedded in a jig… should be many posts and sample code here on the forum…
SG
I searched, looked through 4 pages, not much there.
See if this search has what you are looking for…
http://www.talkshopbot.com/forum/sea...earchid=237745
SG
Here's one that I found along with a rountine
X_Y Zeroing Fixture.zip
XYZ_zero.orginal.sbp
can't find the original post on SB forum for this one:
https://www.etsy.com/transaction/1013709486?
It was only $30 + shipping, you might try contacting him thru Etsy and see if he still sells them.
Daniel E.
ShopBot PRS 48x96 (2010 Model)
Porter Cable Router
Vacuum Table w/ 2 Fein vacs
Aspire 9.0
What I do when I don't mess up wood: http://www.pathhome.net
RB…
Sorry about the bad link… apparently I’m having issues cutting and pasting with windows 10… The search was for "super z" Leave the quotes!
SG