1/16" and 1/8" cutters with 1/8" shank

[matney_models]

I found some one on here that sold small cutters IE 1/16" and 1/8" in boxes of 50. Can any one help me out.

[makeCNC]

I found some one on here that sold small cutters IE 1/16" and 1/8" in boxes of 50. Can any one help me out.

http://www.precisebits.com/

[scottp55]

Kevin,
Not boxes of 50, but we use Drillmans 1/8" shanks a LOT in everything from 30-90 degree engravings(don't recommend the .006" tip 30, but everything else we love).
http://www.ebay.com/sch/m.html?_odkw...%2F8+&_sacat=0
Becoming especially fond of his 1/16 and 1/8" 2F downcuts in hardwoods and exotics.
Very prompt service and no complaints at all in a year.
we buy 5 and 10 packs.
May say soft plastics, but cuts Bloodwood, Purpleheart,etc no problem and clean.
I prefer the Kyoceras if available.
2 cents.
scott

[matney_models]

Thanks for the info!!!!