Results 1 to 2 of 2

Thread: Shopbot V3 Questions

  1. #1
    Join Date
    Feb 2015
    Location
    Alberta
    Posts
    109

    Talking Shopbot V3 Questions

    Hi,

    If I've set up part zero, what command do I issue to go to table zero?

    I have a 48X48 table and the value carried in the Y axis is only 46.523 inches. How do I re-configure the software to reflect this change? Is there a settings file?

    I've worked around the above issues but now I have some time to spend to solve the above questions.

    Thanks in advance to those knowledgeable shopbotters help.

    James

  2. #2
    Join Date
    Jan 2004
    Location
    iBILD Solutions - Southern NJ
    Posts
    7,971

    Default

    Chuck up a v-bit and move it to logical 0,0 - this would be the bottom left corner of the table. Manually zero them out using the ZX and ZY commands.

    Then run TS and follow the instructions. This will automatically write the distances from indicated X & Y 0 (that you just set manually) and the prox switch targets to the my_variables.sbc file. You can edit these manually, but it is just easier to use TS.

    When you turn on the machine, it is customary to run C3, which will run XYZero.sbp - it will run the routine touching off of the prox targets and park itself at the 0,0 you indicated. When you run TS, mic your ZZero plate and enter in the proper thickness. Then when you change a tool or before running a file, run C2 to Zzero the Z using the plate.

    All of this info should be somewhere in ShopBot Docs along with other helpful tips for new users.

    -B
    High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com

Similar Threads

  1. new to shopbot. i have millions of questions.
    By mike_breaker_5 in forum ShopBotter Message Board
    Replies: 11
    Last Post: 11-27-2013, 10:56 AM
  2. Shopbot desktop questions
    By sokwanho in forum ShopBotter Message Board
    Replies: 3
    Last Post: 09-02-2011, 03:28 AM
  3. I'm looking into leasing a Shopbot and have questions
    By rww in forum ShopBotter Message Board
    Replies: 4
    Last Post: 08-18-2009, 08:42 AM
  4. New Shopbot and a few questions.
    By mrps in forum Archives2008
    Replies: 9
    Last Post: 12-05-2008, 04:53 PM
  5. Interested in ShopBot - Questions
    By autobodyman in forum Archives 2003
    Replies: 6
    Last Post: 11-24-2003, 12:19 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •