"Finish cut is a new .125 balloons bit"
I've never heard of a balloons bit. Is that an endmill or a ballnose bit? You need to use a ballnose bit on the finish pass. Try using a ballnose on the roughing pass also
Are you sure there are no vectors hidden you just don't see?
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson