Results 1 to 9 of 9

Thread: Aspire 8 problem

  1. #1
    Join Date
    Oct 2014
    Location
    La Crosse, Wisconsin
    Posts
    69

    Default Aspire 8 problem

    Everything has been going on just fine till now. Two different computers two or three different system available vetrics file panels all with the same error.

    Everything seems fine but finish 3d panel cut when watched closely has a uncut shape (differs from one file shape to the next) the shape goes away at the end of the cutting preview but it shows up when cutting the panel in the bot and does not go away.

    See the two attached pictures.

    Any clues???Capture 2.JPGCapture1.JPG

  2. #2
    Join Date
    Jan 2004
    Location
    iBILD Solutions - Southern NJ
    Posts
    7,986

    Default

    Check that the vector used for the machining boundary is clean and closed with no open parts or loops.

    -B
    High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com

  3. #3
    Join Date
    Feb 2010
    Location
    SOUTH CENTRAL COLORADO
    Posts
    1,155

    Default

    is the file ok to post on here.

  4. #4
    Join Date
    Oct 2014
    Location
    La Crosse, Wisconsin
    Posts
    69

    Default

    I only have a 3D finish pass on it now as that is the operation giving me problems. I took out all the rest of the 3D objects and the v-carve etc just to be sure.

    File is too large to attached here.

  5. #5
    Join Date
    Oct 2014
    Location
    La Crosse, Wisconsin
    Posts
    69

    Default

    It wouldn't be the boundary lines etc as it's Aspire's own vetric files and it's happening with more that one panel design puled in directly from the Aspire 8 program.

  6. #6
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,419

    Default

    Fredrick,
    Running the latest Aspire?(Think it's 8.024 like VCP8?)
    scott
    scott P.
    2013 Desktop/spindle/VCP 11.5**
    Maine

  7. #7
    Join Date
    Oct 2014
    Location
    La Crosse, Wisconsin
    Posts
    69

    Default

    Yup 8.024 windows 7 on my putter windows 10 on wife's same results on either. I'm suspecting that Aspire has some vetric file programming issues.

  8. #8
    Join Date
    Oct 2014
    Location
    La Crosse, Wisconsin
    Posts
    69

    Default

    Wife seems to have found the fix if not the reason for our issue. Except for roughing cuts we have been exclusively using the offset cutting option. Changing to the raster cut option for the finish cut makes the unwanted material go away. Still thinking it's a Aspire issue but maybe not vector related so much as a basic programming glitch

  9. #9
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,419

    Default

    You may want to post your original post on the Vectric forum and send the file to Vectric Support Fredrick?
    Always nice to be able to cut the way you want to if possible, and personally just Hate not knowing "WHY?"
    VERY helpful folks at Vectric, but it is the weekend. Very possible someone of Forum has run across it.
    Smart Wife
    scott
    scott P.
    2013 Desktop/spindle/VCP 11.5**
    Maine

Similar Threads

  1. Aspire problem
    By banjomanwv in forum ShopBot Desktop
    Replies: 2
    Last Post: 06-15-2015, 12:34 AM
  2. pause problem and symmetry problem
    By amholtin in forum Troubleshooting
    Replies: 3
    Last Post: 10-08-2013, 02:07 PM
  3. Aspire
    By jimmya in forum ShopBotter Message Board
    Replies: 4
    Last Post: 10-26-2010, 07:55 PM
  4. Problem between aspire and shopbot
    By frank134 in forum ShopBotter Message Board
    Replies: 18
    Last Post: 02-04-2010, 07:00 PM
  5. 1st original Aspire work - 2nd Aspire project
    By nailzscott in forum Folder 2009
    Replies: 2
    Last Post: 02-26-2009, 04:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •