Made a Cedar bench for my neighbors and engraved the family name into the back board.
20151216_113036.jpg20151216_142321.jpg20151216_142326.jpg20151216_143739.jpg20151222_102224.jpg
Made a Cedar bench for my neighbors and engraved the family name into the back board.
20151216_113036.jpg20151216_142321.jpg20151216_142326.jpg20151216_143739.jpg20151222_102224.jpg
Very cool. It looks nice and beefy. I bet its good and heavy. Good job
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Good Job. What hardware did you use for the back. It looks like it is reclined from 90 degrees.
its 1.5" square tubing on the back, I had a local shop bend it for me, its on a 70 degree bend so it is slightly reclined.
just used lag bolts to secure it to the wood.
Thanks, I thought it looked reclined but sometimes the pictures play tricks on my old eyes.