Results 1 to 5 of 5

Thread: Cedar Bench

  1. #1
    Join Date
    Nov 2013
    Location
    Tyler, TX
    Posts
    141

    Default Cedar Bench

    Made a Cedar bench for my neighbors and engraved the family name into the back board.

    20151216_113036.jpg20151216_142321.jpg20151216_142326.jpg20151216_143739.jpg20151222_102224.jpg

  2. #2
    Join Date
    Mar 2006
    Posts
    7,832

    Default

    Very cool. It looks nice and beefy. I bet its good and heavy. Good job
    Words of Wisdom:
    “Words that sink into your ears are whispered…… not yelled”
    “The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
    “The only difference between a rut and a grave is the depth”
    -----------
    Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
    -----------
    The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson

  3. #3
    Join Date
    Jan 2004
    Location
    Jasper, TX
    Posts
    536

    Default

    Good Job. What hardware did you use for the back. It looks like it is reclined from 90 degrees.

  4. #4
    Join Date
    Nov 2013
    Location
    Tyler, TX
    Posts
    141

    Default

    its 1.5" square tubing on the back, I had a local shop bend it for me, its on a 70 degree bend so it is slightly reclined.
    just used lag bolts to secure it to the wood.

  5. #5
    Join Date
    Jan 2004
    Location
    Jasper, TX
    Posts
    536

    Default

    Thanks, I thought it looked reclined but sometimes the pictures play tricks on my old eyes.

Similar Threads

  1. another carved bench
    By Ajcoholic in forum Folder 2013
    Replies: 16
    Last Post: 08-12-2013, 09:29 PM
  2. Time Out Bench
    By jimmya in forum Folder 2012
    Replies: 10
    Last Post: 04-01-2012, 09:48 PM
  3. A cool looking bench
    By myxpykalix in forum ShopBotter Message Board
    Replies: 1
    Last Post: 01-09-2012, 07:20 PM
  4. Bench
    By jimmya in forum ShopBotter Message Board
    Replies: 1
    Last Post: 11-02-2010, 06:57 PM
  5. Can i run my bench top cnc off of a genartator
    By rsclark@harter.net in forum Archives 2004
    Replies: 5
    Last Post: 06-20-2004, 08:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •