Senior Member
Dovetail drawer boxes
I recently cut my first batch of solid maple dovetail drawer boxes on the ShopBot using JointCAM software. Very pleased with how they turned out.
If you're interested I posted a short video to my Facebook page. You can view it at this link:
https://www.facebook.com/SyzygyWoodw...7424723337548/
PRS Alpha 96-60 ATC
16.9hp Republic Regenerative Blower
Aspire 8.5
eCabinets with ShopBot Link
https://www.facebook.com/SyzygyWoodworks/
Senior Member
Awesome, I did not think about using my Leigh jig to hold the boards
Tim Lucas Custom Woodworks
www.TLCW.us
Senior Member
I thought about making up a jig, but once I realized I had enough z clearance to use the Leigh, I figured there was no point in reinventing the wheel.
PRS Alpha 96-60 ATC
16.9hp Republic Regenerative Blower
Aspire 8.5
eCabinets with ShopBot Link
https://www.facebook.com/SyzygyWoodworks/
Senior Member
Very nice Keith! I bought jointcam when it first came out but had not made a jig yet because of health reasons but i'm starting to work on it. Good job though
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Senior Member
JointCAM is a great piece of software. The user manual that comes with it is also very comprehensive and well prepared.
PRS Alpha 96-60 ATC
16.9hp Republic Regenerative Blower
Aspire 8.5
eCabinets with ShopBot Link
https://www.facebook.com/SyzygyWoodworks/
Posting Permissions
Reply With Quote