This ShopBot Desktop (24" x 18" x 5.5") was bought 13 months ago. Works perfectly and comes with all the original instructions/documents, software (VCarve Pro), dust hose, and 8 bits and collets. This is the HSD 1hp spindle model. The bits included are all sharp and some of them are unused.
Bits & Collets:
- Onsrud 65-023 - 1/4” One Flute Upcut Super O Flute
- Onsrud 61-040 - 1/8" One Flute Straight
- Onsrud 60-111MW - 1/4" One Flute Max Life Compression
- Onsrud 57-910 - 1/4" Two Flute Downcut
- Onsrud 37-61 - 1/2" Carbide Tipped Two Flute Up-shear V
- Onsrud 52-240B (unused) - 1/8" Solid Carbide Two Flute Upcut Ballnose
- Onsrud PCL583659 (unused) - 1/16" Tapered Ball Nose
- Centurion 1/4" DIAMETER 2 FLUTE DOWNSHEAR 1" CUT LENGTH 3" OVERALL
- 1/8” collet
- 1/4” collet
- Technik’s 1/2” Collet (unused)
- Technik’s 1/4” Collet (unused)
Preferable local pickup in Los Angeles, CA. I still have the disassembled crate, and if necessary, I can freight ship it. However, buyer will be responsible for freight cost, logistics and possible damages (that may occur during transit).
Selling for $5000 (originally paid $7800+). Serious buyers and offers only.
shopbot1.jpg shopbot2.jpg shopbot3.jpg shopbot4.jpg