Well you could use the probe and set the distance per point further apart then if you were scanning a 3d object (like a bust of someone). but i'm sure that what you would end up with is straight lines between points and what you would have ultimately is a faceted object.
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson