cribbage board holes

[rseeley13]

30x20 cribbage.zip

I have a customer that wants a cribbage board that is 30x20 inches and he has pegs that are about .25" for holes but the head of the peg measures .5" so they need to be a part farther than normal. I have read the forum on cribbage holes but can't seem to get this to work. The inside holes are always too tight on the corners, is there a way to attach the inside hole to the vector line and not always the center hole?

Any ideas would be great and appreciated.

Thanks,
Ryan

[garyr6]

Sure, I bet your current design use three holes and a single vector for the shape. Try single hole and three vectors, allowing for your spacing.