The latest creation to come off the SB. 7"x18" Cedar square finials to ship to the Boston area.
The latest creation to come off the SB. 7"x18" Cedar square finials to ship to the Boston area.
Mr Spindle,
I presume you model one side and cut it four times by rotating the "blank" four times?
J
VERY nice reproduction work!
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
James,
That is exactly what I did. I wanted to use the indexer, and program it to do a side, turn 90 degrees to do the next side, and repeat until all four sides were done.
This method worked great for a 3.5" blank, but with the big blank, I found that it would grab a little and turn it just enough to make the piece not perfectly square.
Jacob
EXCELLENT Indexer work.....
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson