img052.jpgimg053.jpg
Got these awhile back with a tool
Hope you find them useful
img052.jpgimg053.jpg
Got these awhile back with a tool
Hope you find them useful
Life is like a project you continue to work on until it's finished.
Never start a project you don't intend to finish!
I got the first one printed on a mousepad that came with my machine. but I should print them out and hang them up.
Ken,
Thanks for posting. It will come in handy.
Have not posted this in a while..
The decimal point seems to be the most important on the z axis... x & y not so much....
ShopBot... Where even the scraps and things you mess up and throw away are cool....
Very Nice Thanks Curtiss!
Life is like a project you continue to work on until it's finished.
Never start a project you don't intend to finish!
Curtiss,
Thanks for posting the V-Bits Depths vs Widths chart.
Can't make the v-bit do what I want it to sometimes, but I CAN draw what it "supposed to do" in AutoCAD....
cdj
The decimal point seems to be the most important on the z axis... x & y not so much....
ShopBot... Where even the scraps and things you mess up and throw away are cool....
Not sure if this is happening to everyone, but once I opened that V bit file, my file folder I put it in starting syncing with the cloud, and the amount of files continued counting in the 3,000 range before I deleted it and the syncing stopped. I think there may be a virus associated with that V bit file. Be advised.
PRS Alpha 96" X 48" w/ 12" Z
4hp Spindle
6" Indexer
Aspire 8