USED ShopBot Buddy BT-32. UPGRADED 2.2 kw spindle (water cooled) 3'x2' table. FORSALE

[RoyalRacksUSA]

I purchased a 2006 shopbot bt32 from a gentlemen in michigan. at tht time, it had been sitting for 3 years and was used for one off projects before then. I bought it 2 years ago to help me make prototypes out of wood and plastic, and then do small production runs.

This cnc is ready to go, complete with 3 month old 220v 2.2kw spindle that runs so smooth and quite. I drilled and tapped the table so there are 3/8" threads for rod and hold downs, pretty much every 6 inches.

I will upload more detailed pictures tomorrow.

I will answer any questions, I am located in Middleton, WI. it comes with lap top, the cnc, manual, 20 engraving bits, and hold down clamps.

2015-03-01 14.40.03.jpg

Asking Price: $8k
Open to offers

Brandon
608-630-0153
Brandon@RoyalRacks.com

[RoyalRacksUSA]

Here are the pictures, my apologies on delays.

Royal Racks is now a real thing, check it out and see the product that we made using the shopbot for prototypes!!

www.RoyalRacks.com

File_002.jpgFile_001(2).jpgFile_003(3).jpgFile_005.jpgFile_000(2).jpg

[RoyalRacksUSA]

Screen Shot 2016-07-17 at 11.06.55 PM.jpgScreen Shot 2016-07-17 at 11.06.48 PM.jpgScreen Shot 2016-07-17 at 11.06.40 PM.jpgScreen Shot 2016-07-17 at 11.06.36 PM.png

[RoyalRacksUSA]

Screen Shot 2016-07-17 at 11.06.30 PM.jpgScreen Shot 2016-07-17 at 11.06.23 PM.jpgScreen Shot 2016-07-17 at 11.06.16 PM.jpgScreen Shot 2016-07-17 at 11.06.05 PM.jpg

[RoyalRacksUSA]

Screen Shot 2016-07-17 at 11.05.57 PM.jpgScreen Shot 2016-07-17 at 11.05.46 PM.jpgScreen Shot 2016-07-17 at 11.05.05 PM.jpg

done!!