Member
Extrusion Needed
Looking to see if anyone has a piece of aluminum extrusion like what is used on PRS Alphas and such within the last two years. Extrusion is 6" high and 1.5" wide, grooves at 1.5" spacing. Sample photo below.
I need, at minimum, 2 pieces 16" long or 1 piece 32" long. Longer is ok, I can cut.
Thanks in advance,
Jim
Jim
96 x 60 PRSalpha, 5HP Colombo spindle, Custom indexer, Custom vacuum table, Custom Fire Extinguishing System
New Member
See www.8020.net
regards
Member
Thanks, but the shop not extrusion is by a different manufacturer and does not match.
Jim
Jim
96 x 60 PRSalpha, 5HP Colombo spindle, Custom indexer, Custom vacuum table, Custom Fire Extinguishing System
Senior Member
Senior Member
Sorry Guys...
Nice guesses, but that particular extrusion is a Parker heavy duty series. I shipped a couple chunks to Jim today.
Gary Campbell
GCnC Control
GCnC411(at)gmail(dot)com
Servo Controller Upgrades
http://www.youtube.com/user/Islaww1
"We can not solve our problems with the same level of thinking that created them"
— Albert Einstein
Posting Permissions
Reply With Quote