Results 1 to 9 of 9

Thread: PRS Standard 96 x 48 x 6

  1. #1
    Join Date
    Oct 2010
    Location
    TX
    Posts
    709

    Default PRS Standard 96 x 48 x 6

    Guys and Gals,

    I have a 96 x 48 x 6 PRS Standard machine ( 2008 vintage) that I would like to move down the road. We own a larger one, and thought we would use this one for small projects but that did not happen. It comes with a slow speed spindle that is based off a 2+ HP treadmill motor, and the controls from that unit. It ALSO comes with the original 3.25HP PC router and would be extremely fast to have it mounted and operating like originally set up. ( We wanted to experiment with low speeds and coolant so that we could work on ferrous metals and stone, etc. We just never dedicated someone to experiment with it...) The router will come with a good Dell Small form factor desktop machine, the pictured monitor, and a custom made, spring loaded, tool holder and maybe some diamond pads if I can find them. WIll come with any old version of VCarve software I can find- but it was already old as the hills when I bought it. I highly recommend upgrading to the newer versions. Machine is located at a business, and we can assist in loading into your trailer! No known issues. We can run it for a few minutes when you come look at it. Pretty much a wysiwyg. Feel free to message me and I will answer your questions. This one is my 4th. I love these machines. They do a great job. And even a dummy like me can figure them out... Asking $8650 for this router

    Located in Central Texas (Austin Area)


    Basic picture of machine4175.jpgControl Box & spring loaded bit 4171.jpgKeyboard, slow speed controls etc_4172.jpgMonitor, and speed controls.jpgSlow speed spindle_4174.jpg

  2. #2
    Join Date
    Oct 2010
    Location
    TX
    Posts
    709

    Default

    Computer Components for this system are situated on a computer server rack with a 5' long power strip. This can go with the system at no additional charge. Has a slide out keyboard tray and some other nice features.

  3. #3
    Join Date
    Sep 2013
    Location
    Lakin KS
    Posts
    279

    Default

    What is the footprint of the PRS machines? I wish you were a bit closer. Good luck with the sale.
    Tom Bachman,
    Drafting/Woodworking Instructor RETIRED!
    Lakin, Kansas

    2001 PRT4896
    https://i.imgur.com/xWEFfDk.jpg

  4. #4
    Join Date
    Oct 2010
    Location
    TX
    Posts
    709

    Default

    Foot print is near 6' width (to accommodate the additional space inside the rails, plus the roller assembly for the gantry, plus the motors. And about 10' long I would say that it is about 5' tall +/- little bit). One ca look them up on Shopbot. They give exact measurements for the machines...

    And this one is set up with a router so it only uses 110V....

  5. #5
    Join Date
    Oct 2010
    Location
    TX
    Posts
    709

    Default

    I have been asked for a couple extra photos by interested parties. If anyone needs something different- just send me a PM. Always glad to oblige for this crowd...

    Thanks,

    Monty

  6. #6
    Join Date
    Feb 2008
    Location
    Creative 3D WoodArt, Dongola IL
    Posts
    129

    Default

    PM sent.

    Gerald

  7. #7
    Join Date
    Oct 2010
    Location
    TX
    Posts
    709

    Default

    Gerald,

    I responded but haven't seen any follow up. Wanted to make sure you got a PM from me. Try me through here or PM me.

    Thanks,

    Monty

  8. #8
    Join Date
    Aug 2013
    Location
    Rockport TX
    Posts
    4

    Default

    can you call me at 361-463-0700

  9. #9
    Join Date
    Feb 2017
    Posts
    24

    Default

    My Name is Chris Agent , if you will contact me at 601 686 1730. or cagent80@gmail.com I will purchase this machine . have 6 already in production shops. need one more.

Similar Threads

  1. PRS Standard
    By dan78 in forum PRS Assembly
    Replies: 26
    Last Post: 11-22-2012, 05:00 PM
  2. PRS Standard
    By jimmya in forum ShopBotter Message Board
    Replies: 32
    Last Post: 05-05-2011, 07:49 PM
  3. My new PRS Standard 48 48
    By ATX Poly Products in forum ShopBotter Message Board
    Replies: 2
    Last Post: 08-31-2010, 12:58 PM
  4. PRS Standard Jog /Cut speeds
    By wberminio in forum Techniques for Cutting, Drilling, Machining
    Replies: 8
    Last Post: 02-15-2010, 09:33 PM
  5. Prs standard
    By david_white in forum Archives2008
    Replies: 7
    Last Post: 01-01-2008, 07:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •