I've got a project that I need to carve out of some 16/4 poplar. I've looked but can't find a router bit that is long enough for this.
Anybody know of a place to get a bit that long?
I've got a project that I need to carve out of some 16/4 poplar. I've looked but can't find a router bit that is long enough for this.
Anybody know of a place to get a bit that long?
Daniel E.
ShopBot PRS 48x96 (2010 Model)
Porter Cable Router
Vacuum Table w/ 2 Fein vacs
Aspire 9.0
What I do when I don't mess up wood: http://www.pathhome.net
http://www.mcmaster.com/#end-mills/=14e6zq1
Flute diameter?
Marc
Onsrud 40-564
4-1/8" loc
1/2" dia
6-1/2" oal
you can find them on the bottom of this page http://beckwithdecor.com/index_files/ONS12.htm
Gary
And just in case you ever need a long bit for ice carving during a heat wave
http://icesculptingtools.com/cnc_end_mills.htm
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
thanks, looks like I can find what I need with those sites.
Daniel E.
ShopBot PRS 48x96 (2010 Model)
Porter Cable Router
Vacuum Table w/ 2 Fein vacs
Aspire 9.0
What I do when I don't mess up wood: http://www.pathhome.net
My god those home prices are low, those houses on your site would be multi million dollar homes where I live.....wow I have to move away from here.