I must say thank you to Steve Glass for the slab. I received several of these slabs from Steve at last year's ShopBot Camp in Austin. Flattened the slab with a bottom cleaning bit. Made two bow-ties to stop the cracking of this piece. Laid out the file in Aspire 8.5 and made the cuts with .5 box core and finished with a .25 Ballnose. The finish is Sherwin Williams Chestnut stain and Spar-poly for the topcoat.
https://photos.google.com/photo/AF1QipMLBWve8R4Hd94Gtc_OOOmMfAylBL84HcZEg9r7
Once again, thanks Steve.