Latest Carving in a slab

[terryjones]

I must say thank you to Steve Glass for the slab. I received several of these slabs from Steve at last year's ShopBot Camp in Austin. Flattened the slab with a bottom cleaning bit. Made two bow-ties to stop the cracking of this piece. Laid out the file in Aspire 8.5 and made the cuts with .5 box core and finished with a .25 Ballnose. The finish is Sherwin Williams Chestnut stain and Spar-poly for the topcoat.

https://photos.google.com/photo/AF1QipMLBWve8R4Hd94Gtc_OOOmMfAylBL84HcZEg9r7


Once again, thanks Steve.

[steve_g]

Terry…
Your link doesn’t work for me, I’d sure like to see what you did with the slab!
SG

[terryjones]

Hi Steve,
Highlight the URL, right click and select "go to". It just worked for me. The photo was too large to attach to this site. If is does not work, just email me at tljrns at cableone dot net. I will then respond with the attachment.

TJ

[steve_g]

Here's what I get...


SG

[scottp55]

Same as what Steve gets with Firefox.

[steve_g]

Terry…
I hope you don’t mind that I resized and posted your photo…It’s beautiful! Thanks for showing us!
SG