Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
I think you've just re-invented the weel, very cool!
Also posted on the Vectric Vcarve Gallery forum...
I had several people ask for the design files of the cart and specifically the wheels and I have no problem sharing that.
Just be aware this is not a trivial project, can not be done on a sloppy machine and may need some iterations to get it right (I had to re-do a few parts myself).
But otherwise, enjoy! It was a fun project for me.
You will find the zipped download with a few hints on my web site under the tab "Garden Cart" http://www.tailmaker.net/
You can use any of that for hobby or business purpose as you like. Actually I think the wheels could be made cost effectively when making a whole batch and if the clamping/vacuum holding is customized/automated.
I did not include the file for the v-carved flourish because I have no idea of the copyrights.
Box Joint and Dovetail Software Here
Thanks for the files Gert!
(also downloaded the Guilloche and box clamp again)
Very generous. Thank you Gene