just got this delivered today. now to find the time to install it. I notice no spring in it so it does not lift up if the power is cut? does the stay in place when the machine is powered off?
just got this delivered today. now to find the time to install it. I notice no spring in it so it does not lift up if the power is cut? does the stay in place when the machine is powered off?
As I recall I moved my existing springs when I upgraded.
They don't come with it as different spindles/routers take different springs.
Wow, that is a beautiful assembly! I assume it is the Z/spindle mount for a PRS. It certainly makes my PRTalpha Z/spindle mounting assembly look like a model T in comparison. Chuck
Chuck Keysor (circa 1956)
PRT Alpha 60" x 144" (circa 2004)
Columbo 5HP spindle
Aspire 9.0, Rhino 5
ya I was getting slop in mine after so long and the 2" extra z is really needed. I see how the springs go in now.
Nice! Please post some more pics of it and your installation if you can.
will do I have been too busy and I was too tried today to do it.