Results 1 to 2 of 2

Thread: Turkey Box Call on 4th Axis Rotary

  1. #1
    Join Date
    Apr 2007
    Marquette, MI

    Default Turkey Box Call on 4th Axis Rotary

    I made a longer version of this a while back. Its time to stir the pot on some of the things that can be done on an indexer if you take time to learn and practice.

    Due to the length and bad sound of the original, I have made a faster speed version of this Box Call video and removed the cutting sound. These box calls are sound chambers that amplify any bit noise during cutting.

    You might get to the end of this version:

    Gary Campbell
    GCnC Control
    ShopBot Controller Upgrades

    "We can not solve our problems with the same level of thinking that created them"
    Albert Einstein

  2. #2
    Join Date
    May 2015
    Rochester, NY


    Very cool! I've been wanting to set up a 4th axis but haven't had the time to dive in. I use Bob-Cam so i'd need to check how it posts out of that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts