Results 1 to 4 of 4

Thread: Turkey Box Call on 4th Axis Rotary

  1. #1
    Join Date
    Apr 2007
    Location
    Marquette, MI
    Posts
    3,388

    Default Turkey Box Call on 4th Axis Rotary

    Guys...
    I made a longer version of this a while back. Its time to stir the pot on some of the things that can be done on an indexer if you take time to learn and practice.


    Due to the length and bad sound of the original, I have made a faster speed version of this Box Call video and removed the cutting sound. These box calls are sound chambers that amplify any bit noise during cutting.

    You might get to the end of this version: https://youtu.be/Pkl5KNc8D6o

    GC
    Gary Campbell
    GCnC Control
    GCnC411(at)gmail(dot)com
    Servo Controller Upgrades
    http://www.youtube.com/user/Islaww1


    "We can not solve our problems with the same level of thinking that created them"
    Albert Einstein


  2. #2
    Join Date
    May 2015
    Location
    SF bay area, CA
    Posts
    36

    Default

    Very cool! I've been wanting to set up a 4th axis but haven't had the time to dive in. I use Bob-Cam so i'd need to check how it posts out of that.

  3. #3
    Join Date
    Jun 2016
    Posts
    2

    Default

    Hi Gary.

    What software did you use for that turkey call?

    Peter

  4. #4
    Join Date
    Jan 2004
    Location
    iBILD Solutions - Southern NJ
    Posts
    7,986

    Default

    I don't think Gary is active here anymore.

    IIRC he just used VCP SB Edition.
    High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •