Results 1 to 6 of 6

Thread: Lithophane and Vectric Aspire 8

  1. #1
    Join Date
    Mar 2013
    Location
    Fruitport, MI
    Posts
    61

    Default Lithophane and Vectric Aspire 8

    I am trying to find tutorials on making lithophanes with Vectric Aspire 8. I see some with PhotoVcarve but not the other. I tried searches but must not be good in entering the right search string. Could someone point me to where to look. Thanks in advance.

  2. #2
    Join Date
    Mar 2011
    Location
    Marietta, Ga.
    Posts
    324

    Default

    http://support.vectric.com/tutorials...hanes_GEN.html See if this will help. I would look on the Vectric site on You Tube also...joe

  3. #3
    Join Date
    Sep 2006
    Location
    Garland Tx
    Posts
    2,334

    Default

    VCP is a subset of Aspire… the tutorials for VCP are also valid for Aspire!
    SG

  4. #4
    Join Date
    Feb 2011
    Posts
    344

    Default

    Not sure exactly why [technically] since I never had the need to find out, but I recall reading that you cannot do lithos with VCP.

    Edit:

    Confirmed, only Aspire and PVC can create lithos

    http://www.vectric.com/products/compare.html
    Doug

  5. #5
    Join Date
    Jan 2014
    Location
    L.I. N.Y.
    Posts
    27

    Default

    Its right in there with all the other tutorials for Aspire

    http://support.vectric.com/tutorials...hanes_GEN.html

  6. #6
    Join Date
    Mar 2013
    Location
    Fruitport, MI
    Posts
    61

    Default

    thanks everyone. This has helped.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •