Moulding fun
I had a weird bit of moulding to make with a 3" radius, 1/4" thick with 1/16" sides edges. I used a piece of 3 1/2" poplar as the stock, cut the profile into it, cut the profile out by slicing it off with a bandsaw then freed the moulding from the base using a drum sander.
I build the profile using Aspire 9 and a 2 rail sweep and 1/4" bits.
IMG_20180825_110409.jpgIMG_20180825_121940.jpgIMG_20180825_125621.jpg
ShopBot Details:
2013 PRS 96x60x12 (Centroid upgrade)
4hp Spindle
12" indexer
Aspire
Rhino
Fusion 360
Ferrari 360
Prusa MK3S+
Prusa XL multi-tool