Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Help Finding Trupan

  1. #11
    Join Date
    Mar 2004
    Location
    Delray Beach, FL
    Posts
    3,540

    Default

    You can piece together 5 x 12 from 4 x 8's etc also-Not a big deal.

  2. #12
    Join Date
    Mar 2015
    Location
    Somerset, KY
    Posts
    117

    Default

    I thought about this also.
    2009 BT48 RBK With 10' Powerstick
    2HP HSD Spindle

    2012 PRS ALPHA 144"X60"
    Republic Blower Hold Down
    4HP HSD Spindle

    VCP 8.014

  3. #13
    Join Date
    Aug 2012
    Location
    Davenport Iowa
    Posts
    158

    Default

    Don't know if this helps, but they have a large selection. Located in Kansas and Iowa. Finally something good about living in Iowa!! Very few CNC guys, at least Shopbot.


    http://libertyhardwoodsinc.com
    Life is like a project you continue to work on until it's finished.
    Never start a project you don't intend to finish!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •